Reverse osmosis system

Pre-treatment system

1.Custom designed according to the customer’s raw water analysis, capacity and product water requirements.

2.Warranty one year

3.Install compact

A. Description:

Reverse osmosis, the raw water, first goes by pre-treatment, then by RO treatment. 

Through those treatments, can remove dissolving salt 99% and harmful materials, 

like particle, colloid, organic impurities, heavy metal ions, bacteria, viruses and heat source, etc. 

the system salt rejection rate gets 96-98%, outlet water conductivity gets ≤10μs/cm².

B. Process:

Raw water+ Raw water tank +Raw water pump+Quartz sand Filter + Activitated carbon Filter + 

Scale inhibitor system +Ultrafilter+High Pressure  Pump+ Reverse Osmosis Host System + Pure Water Tank

C. Parameters:

1. Capacity: customized

2. Rated power: check with the configuration list

3. Voltage: 220V/3phase/50Hz, 380V3phase/50Hz,or customized at different country

4. Desalting rate:97-98%

5. Water recovery rate: 50-70%

6. Conductivity of raw water: ≤400μs or custom designed

7. Conductivity of pure water: ≤10μs or custom designed

D. Function:

1. Manually and automatically wash RO membrane, CIP system

2. Manually wash RO membrane with chemicals on machine,

3. Automatic shut-down at tank full,

4 .SS high pressure components, SS pump to avoid the leakage.

5. Multi-stage pumps protect the machine when lack of water,

6. Protection in such cases as no power, lower pressure, higher pressure, shot circuit, creepage, etc.

E. Service: 

1. Installation guideline.

2. Factory tested to ensure trouble-free operation

3. 24 hours/7 days after sale service for the whole life of the system

4. We can manufacture machines according to your requirement, welcome to our factory

1.Sand filter

   Melt Blown Polypropylene removes dirt, rust and sediment particles down to 5 microns. There are several different types of sediment cartridges.

   Pleated filters feature increased surface area and longer life. These cartridges are washable and reusable.

   Melt blown polypropylene filters are designed for the removal of dirt, rust and sediment from water. 5 and 20 micron are the most popular sizes for drinking water applications.

   String wound filters are an inexpensive solution to your filtration needs. These cartridges come in a variety of media types and have a wide range of applications.

2.Carboon filter

   Coconut Shell Carbon Block Cartridge(s), 10 Micron removes chlorine, taste, odor and chemical contaminants.

   Activated carbon block filters typically have a 0.5 to 10 micron filtration capability, making it also helpful for particulate filtration, removing taste and odor from chlorine, insoluble lead reduction, and demonstrating, in some cases, removal of Giardia and Cryptosporidium. A 5-stage reverse osmosis system has an third housing to hold an additional carbon block cartridge.

3.Softener

   Sodium ion, that is, sodium ion exchanger, used to remove calcium ion, magnesium ion in water, make softening water ion exchanger. The calcium and magnesium ions that form the hardness of water are exchanged with the ion exchange resin in the softening device, and the calcium and magnesium ions in the water are exchanged with sodium ions, so that the carbonate scale and sulfate scale are not easy to form in the water, so as to obtain the softening water

What Can Reverse Osmosis Remove From Drinking Water?

    The reverse osmosis process can remove a myriad of organic and inorganic contaminants from your tap water.
These systems specialize in removing chlorine taste and odor, rust, sediment and also alleviate common worries about public water by reducing or completely removing arsenic, asbestos, chromium, fluoride, lead, mercury, VOCs, THMs, giardia and cryptosporidium. For a more expansive list, view our contaminants removed by reverse osmosis list or our thin-film membrane particle size removal chart above.